Products About us Contact telephone 13,967,182,428 SAM-1102 Chinese fir electrostatic generator is a kind of electrostatic application equipment for. It is extensive work in the field of non-woven fabrics, printing, film, painting, flocking, sorting and biological engineering. With a small, simple, smooth installation. The electrostatic voltage output of the generator is controlled by the external input signal. The input signal may be of one of the contacts of the relay can also be an input voltage can also be connected to a photoelectric switch control. The output voltage of the electrostatic generator can also actively vented to avoid high pressure with the surrounding objects stored in the high voltage power supply unnecessary discharge occurs, to minimize electromagnetic interference. Section I: role of the principle of the electrostatic generator by electrostatic transmitter (stick) and DC high voltage power supply. DC high voltage power supply the ion emitter emitting negative ions (positive ions), the ion emitter (bar) (bar) and negative (or positive) high pressure and the object (workpiece) to bring the charge (labor charge). The higher the voltage, the greater the effective range. Section II: Technical parameters (a), high-voltage power supply Model SAM-1102 Input voltage 220V/50HZ Input Current (A) 0.12 Output Voltage KV 0 0 1 14.0 2 16.0 3 18.0 4 20.0 Output Current Max 1mA Dimensions (mm) 270 × 205 × 125 Dimensions (mm) 180 × 150 (b) control, contact control. The contact can be hard contact can also be a soft contact soft contact withstand voltage ≥ 12V, current ≥ 1mA. 2, the voltage control. The voltage must be between 6V ~ 12V, output current ≥ 1mA 3 photoelectric switch control. The photoelectric switch must be a DC NPN normally open type, operating voltage 12V. (C), the use of ground: first DC high voltage power supply output ground terminal to ground, and to ensure that high-voltage DC power supply housing and the earth resistance is less than or equal to 10Ω. 2, then high pressure: the ion emitter (bar) high-voltage input plug into the DC high voltage power supply output jack, and then tighten the nut that comes with the high-pressure plug. 3, then the control plug: A. If it is subject to the control of the external contacts, "2", contacts the other end of the control plug contacts one end of the control plug "3", "1" is empty. When the contact is turned on, the high voltage output; disconnect high voltage output. B. Is subject to input voltage control, positive then "1", the negative pole "3", "2" empty. Input voltage between 5V to 12V, the input current is greater than 1 mA when the input voltage, high voltage output; no input voltage, high voltage output. C. If it is controlled by photoelectric switch. The photoelectric switch must be NPN normally open type, the photoelectric open light brown wire, blue wire, black wire "3". Photoelectric switch is closed, the high-voltage output; photoelectric switch off when the high-voltage output. 4, power supply: the character of the DC high voltage power input plug into 220V/50HZ AC power outlet with the ground. Close the power switch on the DC high voltage power indicator light, adjust the control output voltage range, available appropriate DC high voltage output.